Very Good Quality High Chair
February 6, 2022
We just assembled the high chair and adjusted the straps to the appropriate sizes for our son and are super excited to begin using this product, with the expectation of using it for several years.
Ac couple of assembly comments:
1. Make sure you have a ruler or tape measure to place the seat and foot board in accordance with the directions.
2. Once assembled, add the cushions by removing the hard plastic parts. Then detach the straps from the back piece and insert the hard plastic through the bottom of the padding. Then reattach the straps where they had previously been removed. Put the seat cushion over the seat with the hole in the cushion parallel with the hole on the front of the seat. Reattach the two hard plastic pieces to the seat and back. Ensure it securely fit to the back and snaps into place on the seat.
3. Secure the Velcro straps around the sides of the hard plastic harness.
4.Add the tray by sliding in, at an angle, the back ends of the tray to where they fit on the back of the front harness already attached to the back of the high chair. Then gently push down on the inside front of the tray until you hear a click. Check to make sure the tray is securely fastened.
5. Remove the tray by pressing the release button under the inside middle of the tray (where the sound of the click came from when it was being attached). Be careful to have one hand on top to prevent it from detaching and flying off the high chair (like it did to me and maybe others the first time I/we removed it).
6. Once tray is removed, place child in seat and adjust straps as needed.
7. Attach, detach, adjust as needed.
This product review was collected by the manufacturer.